***FULL SIZE FDE***

92 Elite LTT Red Dot Ready Slide

The 92 Elite LTT Red Dot Ready Slides for use with your 92 series pistol!  

Our Red Dot Ready slides are "plug and play" - simply install your optic, add your existing barrel & recoil assembly, and attach the slide to your existing frame. 

All Elite LTT Red Dot Ready Slides are cerakoted and ship with the footprint pattern adapter plate you selected already installed and ready to accept your optic upon arrival. The RDO slides are 'G-model'/decock ONLY.

Compatibility Specifications: 

Our slides will work on any 92 FS (9mm) and later model pistol including Beretta's M9A4 and 92X RDO, WC Brigadier Tactical, M9 and M9A1s - the only known exceptions that are not compatible are the 92A1 and 92S pistol frames. 

92X Performance: Red Dot Ready Slides do fit and function on a 92X Performance, however neither the frame mounted nor slide mounted safety/decocker will function AT ALL.

*LTT does not assume any liability for injury or damage that results from use of an RDO slide on the 92X Performance without a functioning safety/decocker.*

This slide kit does NOT ship with a red dot optic OR a barrel/recoil assembly.

If you have an older gun, we recommend replacing your barrel assembly, or at the very least your locking block. 

Q: What is the cowitness of the RDO BUIS?

A: The LTT RDO included front & rear BUIS is a lower-1/3rd cowitness.

Q: What red dot optics are supported by the LTT RDO Solution?

Our Holosun EPS Plate fits:

• Holosun EPS
• Holosun EPS Carry

Note: If you order this plate for your existing LTT RDO slide, you will also need the corresponding correct front sight (included with the plate). The EPS Plate uses a much lower BUIS rear sight and will not work correctly without this shorter front sight. 

Warning: This plate will not fit the 407/507K optics. While the manufacturer lists the footprint as the same, the mounting post has a different height on the EPS optic and a slight difference in the size of the optic body. 

EPS Optic to Plate Screws:

EPS: EPS to RDO plate use: 4x40 - 5/16